For the VPN to work, the tunnel uses UDP port 500 which should be set to allow ISAKMP traffic to be forwarded at the firewall. Note: Ensure that the Port number is set to the default value of 500. In the Remote Host section under the General tab, enter the public Host Name or IP Address of the network you are trying to connect to. The VPN Site Configuration window appears. Open Shrew VPN Access Manager and click Add to add a profile.
#SHREWSOFT VPN FOR MAC PASSWORD#
Click Add Row to add user accounts, used to authenticate the VPN clients (Extended Authentication), and enter the desired Username and Password in the fields provided. Navigate to VPN > IPSec VPN Server > User.
The settings are based on the document, Configuration of an IPSec VPN Server on RV130 and RV130W, and will be referred to in subsequent steps. Note: The above settings are an example of an RV130/RV130W IPSec VPN Server configuration. If the IPSec VPN Server is not configured or misconfigured, refer to Configuration of an IPSec VPN Server on RV130 and RV130W and click Save. Verify that the IPSec VPN Server for the RV130 is properly configured.
Log in to the web configuration utility and choose VPN > IPSec VPN Server > Setup.
#SHREWSOFT VPN FOR MAC HOW TO#
The objective of this document is to show you how to use the Shrew Soft VPN client to connect with an IPSec VPN Server on the RV130 and RV130W. For information about how to do this, refer to the article Configuration of an IPSec VPN Server on RV130 and RV130W. Note: To be able to successfully setup and configure the Shrew Soft VPN client with an IPSec VPN server, you need to first configure the IPSec VPN server. Make sure to download the latest release of the client software. The RV130 and RV130W work as IPSec VPN servers, and support the Shrew Soft VPN client.
IPSec VPN (Virtual Private Network) enables you to securely obtain remote resources by establishing an encrypted tunnel across the Internet.
0 kommentar(er)
